How Do I Setup my
123.hp.com/setup 6968 Printer?
HP OfficeJet
6968 all-in-one printers are one of the most popular streaming devices of all
time since they are not just printers, but also copy machines and fax machines.
These machines can help you perform all three tasks, and is sleek and slender
as well. The printer can be installed and activated to be completely wireless
and can be used to print documents from mobile phones as well.
In this
blog, we will take you through the different steps in the 123.hp.com/setup 6968
installation,
and help you print papers from both your computer and mobile phone. The printer
can be connected to both wired and wireless internet, so please have an
internet connection that you can connect the speakers to.
Once you
have the internet connection down, please proceed with the installation.
Step 1 – Take the printer out of the box.
The first
step in the printer’s installation is to unbox the printer, and make sure that
the printer accessories are on point. Meaning, the printer cables must be
intact. Usually, the printers come with a cable to connect themselves to the
wall mount power socket and one wire to connect itself to the computer. Then,
there will be a couple of cartridges, so please let your dealer know if any of
those aren’t there.
Connect the
printer to the power port on the wall.
Switch the
printer on.
Press and
hold the power button to turn the printer on.
Open the
paper output tray, and insert the cartridges on to their slots. Push it till
the cartridge goes click.
Close the
compartment, and open the printer’s paper input tray.
In there,
please load the necessary amount of papers needed.
Please make
sure not to overload the printer with paper. If you do so, there is a chance of
paper clogging.
Once the
printer’s power, papers and cartridges are on place, the printer will go ahead
and print a sample paper, which you can use to check the alignment and other
settings. IF you want to adjust the 123.hp.com/setup 6968 settings, please do
so manually.
Step 2 – Download and install
the printer’s driver on the computer
Now, all you
have to do is to simply download the printer’s driver software on to the
computer that you want to connect the printer to, and then make sure that the
printer software is downloaded and installed before the printer is connected
with the computer.
Please open
the browser and go to the HP site. In there, please enter the model number, and
the operating system. Printer model number is 123.hp.com/setup 6968 and the
operating system is your input. Once these two are furnished, you will get to
download the printer driver.
Step 3 – Connect the printer to
the computer
Once you run
the printer software, you can very well go ahead and follow the on-screen
instructions. The instructions will at point ask you to connect the printer and
the computer. It is enough if you turn the printer and the computer on then.
After
connecting the printer to the computer, you can start printing from the
computer. Before you buy the printer, please check if the computer and the OS
that you are using to print is compatible. IF not, the print jobs might lag in
the queue.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.