How to Install the
123.hp.com/envy4510 Printer
Envy printers are one of the very few printers that are
truly made for homes. All of the other competing house printers are simply
watered-down industrial machines. Not machines made specifically for homes.
However, 123.hp.com/envy4510 printers are machines built specifically for this
purpose.
These printers are cost-effective, both in terms of the
initial price, and in terms of the initial purchase, and in terms of recurring
maintenance. The printer uses minimum ink, yet manages to keep up the print
quality, and the printer has a very liberal monthly printing cycle. The
cartridges last longer, and the printers can work for long hours continuously,
meaning, the printers can handle a home’s printing needs, indefinitely.
How do I start the
123.hp.com/envy4510 setup
The first step in this printer setup is to simply take the
printer out of the box, and listing down all the accessories you got with the
printer. You are supposed to have received a printer, two wires that you can
use to connect the printer with power and the computer, a couple of cartridges
and the warranty card. If any of these are missing, please contact your dealer.
Take the printer out, and connect the printer to power using
the wire given.
On pressing, and holding the power button, the printer gets
started.
After the printer is on, please open the printer’s output
compartment, and open it. In there, you will see two slots to be able to insert
the HP cartridges. Please push them until you hear the click.
Once you have the cartridges installed, you can go ahead and
insert a few papers into the paper input tray.
This means that your printer will have power, papers and the
ink part figured out. This is technically an indicator that the printer is
ready to print, and all that is left, is to give it something to print. Where
and how do we get the 123.hp.com/envy4510 printer to work?
Installing Envy 4510 printers in the
computer
The printers are supposed to be connected to a computer,
wired, at least during the first time installation. This wired connection need
not happen immediately. You can start out by installing the driver software for
the printer on the computer, and then connect the printer to the computer. But
the, where do you get the printer driver?
Go to the official HP site. To download the right driver
software, one must furnish two things. One, the printer’s model number. Two,
the operating system on which the computer runs. If you give these two, then
the site will give you the exact file that you have to download and install, to
be able to use the printer.
After the file is downloaded, please hit install. The
printer software’s installation wizard comes into play, and it uses on-screen
instructions to guide you through the rest of the installation process.
This includes the step where you will have to connect the
printer with the computer, using the HDMI wire given. We’d like to reiterate
that it is not safe, nor is it productive enough to use non-HP brand
accessories. Except for papers, everything that printer has to be from the
house of HP, or the performance takes a dip.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.