123 HP OJPRO 9010 PRINTER SETUP
Installation software and driver
- Type in the search box of the 123 HP Support page in the name of your 123 hp printer.
- Click the Software and Drivers Register.
- To continue, click Go.
- Once you have selected your operating system and version, the website shows the software and drivers.
- Download and run the installation file.
123 hp ojpro 9010 printer not found during network driver setup (Windows)
Do the following to fix this problem and set up your 123 hp printer on a wireless network:
Unplug the router’s power supply cable and switch off the 123 hp printer and your laptop. After a while the power cord is plugged back to the router and switch on your printer and computer at 123 hp. Check whether the problem has been solved.
Confirm that the 2.4 GHz router band has been activated and you are linked to your 123 hps printer and not to any VPN, guest or host network. Confirm also that the wireless signal is enabled, that the icon light is either permanent or blind and that Airplane Mode is switched off. Check whether the problem has been addressed.
Whether using the Wireless Setup Wizard to manually connect the 123-pipe printer to your network or use the Wi-Fi Protected setup to connect your 123-pipe printer to the network.
Run the 123 HP Print and Scan Doctor, and check if any of the firewall software deactivates the problem.
Download the recent version of your 123 hp printer software from internet. Start the setup and verify whether the problem has been addressed.
Using 123 HP Print and Scan Doctor to help resolve printer issues(windows)
You can turn on your printer and connect it to your laptop to solve print problems. Download HP Print and Scan Doctor and operate them. Once your hp printer is selected on your screen, it can be used to solve 123.hp.com/ojpro 9010 problems by clicking Fixed Printing and obey the prompts to resolve the problem when a red X is displayed.
- Click Fix Scanning and follow the instructions to solve the problem if a red X appears.
- Resolve any problems with firewalls by clicking Network and then selecting Firewalls troubleshooting.
The supply levels and data on the cartridge can be viewed by clicking on the 123 hp printer and choosing the supply rates. Click 123.hp.com/ojpro 9010 and select Advanced Printer Data for 123.hp.com/ojpro 9010. Click Update HP Printer Firmware to update the firmware. To diagnose and clean any 123 hp printer, select Printer Services. Select Show Advanced Info to view 123.hp.com/ojpro 9010 network link data. To view the claim code, click Web Services then select Print ePrint Directive Page
123 HP OJPRO 9010 Print Jobs Stuck in Print Queue (Windows)
When your printed jobs are in a print queue try the possible alternatives mentioned below:
- Open the Print Spooler and press Reset.
- Disconnect the printer energy cord. Reconnect it and try to print after a while.
- You can disconnect the USB cable when your link sort is a USB printer link. Restore it after a while and try to print.
- Try to solve the problem with the Print and Scan Doctor.
- Print in the queue window after unchecking Pause Printing and Use 123 hp printer Offline.
- Try to print after you have set your 123.hp.com/ojpro 9010 to be the 123-hp standard printer and 123-hp printer.
- Disable the firewall of your system and then try to print. When the issue is not resolved, reactivate the firewall and continue to the next step.
- Go to Printers and Devices and remove your printer from the list. After you restart your laptop and then try to print, reinstall your 123.hp.com/ojpro 9010 software.
- Try to print from another application to ensure that the issue does not lie with the application from which you tried to print before.
- Try to print from another customer account to ensure the account you tried to print from has the required permissions.
- Enter a timely command in the System File Checker: SFC / scan to detect problems with system files and to repair them.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.