Quick Customer Support Providers
How do you connect your hp printer to wireless internet?
- Touch the wireless button that looks like a two-blue antenna on either side.
- The blue light shows that it’s ON. Now press the button SETTINGS.
- On this screen, select 123 HP Printer Wireless Setup Wizard and select YES and follow the instructions on the screen.
- The printer detects all available networks.
- Select the name of your router from the list.
- You are encouraged to enter your password for the network. Contact your ISP if you don’t know it.
- Follow the instructions on the screen and confirm your wireless network connection.
- Click here for full information 123.hp.com
123.hp.com/setup – Easily setup your HP Ink Cartridges
- Pull your finger into the slot on the right side of the printer to open the access door of the ink cartridge.
- Remove the tin cartridge from its packet and insert it into a color-coded slot first.
- The cartouche must be kept sideways.
- Press the cartridge to the slot until it snaps in.
- Repeat for all the other cartridges and close the entrance door.
- Wait until the printer aligns the incubators and prints the alignment page.
- NOTE: The 123 HP Setup cartridges that come with your printer should be installed in the beginning of the ink cartridge.
- Click here for full information 123.hp.com/setup.
How to connect wired configuration to HP Printers?
- An Ethernet or wired connection provides a way to connect your 123.hp.com/setup network printer.
- An Ethernet port is a port that Ethernet cables plug into in your computer or network router.
- Alternatively, these ports are called jacks or sockets.
- Most computers are connected to a wired network by one built-in Ethernet port.
- Ethernet cables differ from the phone cables that we normally use. The connectors differ.
- A wider and thicker Ethernet cable connector. It has 8 contacts, and there are 2 to 6 contacts with a telephone connector.
- Make sure you use the CAT-5 cable to establish the wired connection of your printer.
123 HP ETHERNET CONNECTION
- The following installation method is for 123.hp.com/setup printers with wired networking capabilities.
- Ensures you have an Ethernet cable on your 123-hp printer model and supports wired network connections.
- When selecting a connection type during installation, make sure you select the Wired Network or Ethernet option.
- You need:
- A network router.
- A switch or hub with available Ethernet ports is required if the router does not have any free ports.
- NOTE: The 123 HP Setup cartridges that come with your printer should be installed in the beginning of the ink cartridge.
- An Ethernet cable, a standard telephone cable must not be used.
HOW TO CONNECT THE PRINTER TO THE NETWORK?
- Make sure the Ethernet cable and the router, switch or hub are connected to the printer.
- This connection ensures that the printer is found during the installation process by the computer.
- Turn the 123 HP printer on. Remove the Ethernet port plug or protective cover on the printer.
- It is usually found close to the power supply.
- This shapes the Ethernet port.
- Connect the Ethernet cable to the port of a printer and connect it to the router, switch, or hub from its other end.
- For full information click here 123.hp.com.
HOW TO INSTALL THE SOFTWARE?
- The 123 HP Setup printer must be switched on.
- To disconnect the USB cable from the printer on the computer.
- Go to HP Customer Support–Downloading Software and Driver.
- If requested, choose a method for identifying the model of your printer, and follow the on-screen instructions for downloading the page.
- Click Download next to the full function driver (recommended) or click Base Drivers for additional 123.hp.com driver options.
123.hp.com/setup and installation tips
- This is the first step towards establishing your 123 HP Printer Unbox for the 123.hp.com printer and removing all tapes and safe packing.
- Remove from around the printer the plastic film.
- The thick film on the document feeder’s adjustable paper guide must be particularly removed as it can cause the printer to jam when in use.
- Connect the power cord.
- Connect the 123 HP printer either wirelessly or with an Ethernet cable to the internet.
- Fill in both trays of paper.
- Configure the printer. Follow the instructions on the screen to select the language, area and time.
- Install the cartridges of the ink. Follow the on-screen instructions for the calibration of the printer.
- Adjust the display screen to a more convenient angle if necessary.
HP Printer Software Installation:- Download the software from the website of 123.hp.com/setup.
- Once downloaded, double – click the downloaded file and start the installation process.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.